Products
of K.S. Mould Parts Co.,Ltd. |
|||||||||
|
1. | Ejector Pin for Plastic Mould and Diecasting. | |||||||
Material |
- |
SKD-61 | HRC 40 | Ion Nitriding Hv 900~ | |||||
- |
Din Standard. | ||||||||
- |
Jis Standard. | Check Stock >> | |||||||
- |
Head thickness 4 mm. | Check Stock >> | |||||||
- |
Inch Size | Check Stock >> | |||||||
- |
SKH-51 | HRC 58~60 | Check Stock >> | ||||||
- |
We supply Limited Length Pin as request (+0.02 , -0 ). | ||||||||
|
2. | Square Pins. | |||||||
Material |
- |
SKH-51 | HRC 60 | ||||||
- |
SKS-21 | HRC 60 | |||||||
| - |
Made to order. | ||||||||
| |
|||||||||
|
3. | Stepped Pins. | |||||||
Material |
- |
SKH-51 | HRC 60 | ||||||
- |
SKD-61 | HRC 40 | (Ion Nitriding Hv 900~.) | ||||||
| Check Stock >> | |||||||||
| - |
Made to order. | ||||||||
|
4. | Center Pins. | |||||||
Material |
- |
SKH-51 | HRC 60 | ||||||
- |
SKD-61 | HRC 50,40 | (Ion Nitriding Hv 900~.) | ||||||
| - |
Made to order. | ||||||||
|
5. | Core Pins. | |||||||
Material |
- |
SKH-51 | HRC 60 | ||||||
- |
SKD-61 | HRC 50,40 | (Ion Nitriding Hv 900~.) | ||||||
| - |
Made to order. | ||||||||
|
6. | Punches for Pressing. | |||||||
Material |
- |
SKH-51 | HRC 62 | ||||||
- |
SKD-11 | HRC 62 | |||||||
- |
HAP-40 | HRC 65 | |||||||
- |
Straight Type, Shoulder Type, Square Type, Pilot Type, Burring Type, Drawing Type. | ||||||||
- |
Made to order. | ||||||||
|
7. | Sleeve Pins | |||||||
Material |
- |
SKD-61 | HRC 40 | Ion Nitriding Hv 900~ | |||||
- |
SKH-51 | HRC 60 | |||||||
| - |
Made to order. | ||||||||
|
8. | Other Moulding Parts. | |||||||
- |
Request from customers. | ||||||||
| |
|||||||||
Services
of K.S. Mould Parts Co.,Ltd. |
|||||||||
|
1. | Ion-Nitriding Service. | |||||||
- |
It's case hardening for material which has Al and Cr. | ||||||||
- |
Smooth surface after nitriding, good for slide parts. | ||||||||
- |
Request from customers. | ||||||||
